Features & Benefits

ICF buildings are much more energy efficient than ones built with wood or steel, yet they cost only slightly more. Among the many benefits of building with ICFs are tax incentives. And concrete buildings are quieter, safer, lower-maintenance and provide all the same flexibilities as other building materials.

What makes ICF buildings so energy-efficient?
Energy savings and comfort are built into every ICF system. ICFs start with a high it-Value. Four inches of ASTM C 578 polystyrene foam insulation, combined with a five inch concrete wall a typical ICF system – are rated above R-17 at 75* mean test temperature.

But that’s not all! Air infiltration in an ICF structure is minimal due to the continuous air barriers provided by the foam insulation and the concrete. Likewise, there are no convection currents within wall cavities. The concrete walls of an ICF building have high thermal mass, which buffers the interior from the extremes of outdoor temperature during every 24-hour cycle. This reduces both peak and total heating and cooling loads.

This combination of high R-values, low air infiltration, and high thermal mass is believed to account for the amazing 25% to 50% energy savings of ICF versus wood or steel-framed structures. Equivalent wood-frame thermal performance would require 2 x 12 construction with super-insulated wall cavities.

How much does an ICF building cost?
The many benefits of a structure built with insulating concrete forms (ICFs) are available for only slightly more than the cost of other building materials. ICFs are simple to assemble and they consolidate several construction steps into one. The walls can be economical despite the use of high-quality materials. ICF material cost ranges from about $1.75 per square foot to about $3.50 per square foot. Cost for installation labor, reinforcement, bracing, and concrete placement will be additional. On average, ICF buildings cost about two- to five-percent more.

Are there tax advantages to building an ICF building?
The Emergency Economic Stabilization Act of 2008 extended tax credits for energy efficiency measures on commercial buildings or systems placed through December 2013. A one-time tax deduction of up to $1.80 per square foot is available to eligible owners or tenants (or designers, in the case of government-owned buildings) of new or existing commercial buildings designed to reduce the total annual energy and power costs [..] by 50 percent or more in comparison to a reference building which meets the minimum requirements of ASHRAE Standard 90.1-2001. Partial deductions of up to $0.60 per square foot can be taken for comparable reductions from any one of three building systems – the building envelope, lighting, or heating and cooling system – that meets goals consistent with achieving the 50% savings for the entire building. For more information view the IRS Instructions & IRS Guidance or visit the Tax Incentive Assistance Project or Commercial Buildings Tax Deduction Coalition.

What other advantages do ICF buildings provide?

SUSTAINABILITY
ICF buildings reduce the use of wood and steel, optimize energy performance, and build durable, easy-to-maintain structures. The concrete used to fill the form cavities use recycled materials, is manufactured locally, will not burn or rot and contains negligible levels of VOCs. The easiest and most economical way to achieve LEED Certification for residential and light commercial projects is to build them with ICFs.

QUIET
Owners of an ICF building almost always remark on how unbelievably quiet it is They expect the new-found comfort and energy efficiency, but the peace and quiet -the protection from outside noise – never fails to surprise and delight them.

SAFE
The high-mass walls of an ICF building not only give it a remarkably solid feel, but they also make it safer for those inside and a remarkably solid and secure investment, too. Concrete buildings have a proven track record of withstanding the ravages of hurricanes, tornadoes and fires, when all the stick-built structures around them are in ruins. In fire wall tests, ICFs stood exposure to intense flame without structural failure longer than did common frame walls. The polystyrene foam used in most ICF forms is treated so it will not support combustion. Also, tests show that its tendency to transmit an outside flame source is less than that of most wood products. Many insurance carriers are now offering a discount on an owner’s policy for a building made from ICFs.

LOW MAINTENANCE
The equation is simple. No Rot = Less Repair and Maintenance. Neither polystyrene nor concrete will ever rot or rust. Concrete can even be exposed to the elements for centuries with few ill effects. Reinforcing steel, buried deep inside and protected by concrete’s alkalinity, does not corrode.

FLEXIBILITY
ICF buildings can be designed in any style, and will accept any traditional exterior finish including vinyl or wood siding, stucco and brick. Because custom angles and curves are easily created, it’s simple to build in bows, bays and radiuses. And ICF systems accommodate any of today’s most popular design features, such as tall walls, large openings, long floor spans, and cathedral ceilings.

These inherent benefits of ICF Construction Technology are the final market driver. ICF buildings are strong, safe, quiet, comfortable, secure, easy-to-maintain, highly energy-efficient, demonstrably environmentally-friendly, and affordably cost-effective. To view a video on ICFs, click here.  Learn more about building with concrete at https://buildwithstrength.com/.